Меню
Меню
Меню
Меню
Work reliably and effectively on the transmission control units (TCUs) that are equipped on numerous Buick, Cadillac, GMC and Chevrolet vehicles.
Upgrade 1.68
Thanks to two new protocols dedicated to TCU reprogramming, you can now remap GM automatic transmissions with Bosch TCUs 6T70, 6T75, 6T80, and 6L45, 6L50, 6L80, 6L90. Choose KESS3 and discover how to expand your services for your customers and increase your earning opportunities. Work to repair or enhance the performance of hundreds of potential vehicles now available on Alientech Suite.
New TCUs:
Meet your customers’ needs with a single tool for ECU and TCU reprogramming and activate the CAR – BENCH/BOOT protocols to start working on these new supported control units immediately.
Performance enhancement through reprogramming of the automatic transmission control unit is a constantly growing service.
Tuning the management parameters of a gearbox means improving performance and driving pleasure, with a keen eye on fuel consumption. In some cases it is essential to adjust the calibration of the TCUs in order to complete the process and ensure that the engine and gearbox can work in perfect harmony, maximising the vehicle performances.
Alientech has always played a leading role in this sector by offering concrete and powerful solutions for professionals.
Not just tuning! Working on automatic transmission control units presents a great opportunity for business, mainly focused on repair.
Expensive electronic components, including the TCU itself, which manages the mechanical system’s operation, can be saved from replacement.
So, through recalibration, you can save to your customer significant amounts of money! KESS3 and ECM Titanium are the fastest and most reliable tools to excel in your work.
KESS3
TCU
BENCH MODE
RD, WR in Bench Mode
| TCU Brand | TCU Version | Vehicle Brand | FULL RD/WR | Mode |
| Bosch | 6T70 | Buick | Yes | Bench |
RD, WR in Bench Mode
| TCU Brand | TCU Version | Vehicle Brand | FULL RD/WR | Mode |
| Bosch | 6T70 | Cadillac | Yes | Bench |
RD, WR in Bench Mode
| TCU Brand | TCU Version | Vehicle Brand | FULL RD/WR | Mode |
| Bosch | 6T70 | Chevrolet | Yes | Bench |
RD, WR in Bench Mode
| TCU Brand | TCU Version | Vehicle Brand | FULL RD/WR | Mode |
| Bosch | 6T70 | GMC | Yes | Bench |
KESS3
TCU
BENCH MODE
RD, WR in Bench Mode
| TCU Brand | TCU Version | Vehicle Brand | FULL RD/WR | Mode |
| Bosch | 6T75 | Buick | Yes | Bench |
RD, WR in Bench Mode
| TCU Brand | TCU Version | Vehicle Brand | FULL RD/WR | Mode |
| Bosch | 6T75 | Cadillac | Yes | Bench |
RD, WR in Bench Mode
| TCU Brand | TCU Version | Vehicle Brand | FULL RD/WR | Mode |
| Bosch | 6T75 | Chevrolet | Yes | Bench |
RD, WR in Bench Mode
| TCU Brand | TCU Version | Vehicle Brand | FULL RD/WR | Mode |
| Bosch | 6T75 | GMC | Yes | Bench |
KESS3
TCU
BENCH MODE
RD, WR in Bench Mode
| TCU Brand | TCU Version | Vehicle Brand | FULL RD/WR | Mode |
| Bosch | 6T80 | Cadillac | Yes | Bench |
KESS3
TCU
BENCH MODE
RD, WR in Bench Mode
| TCU Brand | TCU Version | Vehicle Brand | FULL RD/WR | Mode |
| Bosch | 6L45 | Cadillac | Yes | Bench |
RD, WR in Bench Mode
| TCU Brand | TCU Version | Vehicle Brand | FULL RD/WR | Mode |
| Bosch | 6L45 | Chevrolet | Yes | Bench |
RD, WR in Bench Mode
| TCU Brand | TCU Version | Vehicle Brand | FULL RD/WR | Mode |
| Bosch | 6L50 | Cadillac | Yes | Bench |
RD, WR in Bench Mode
| TCU Brand | TCU Version | Vehicle Brand | FULL RD/WR | Mode |
| Bosch | 6L50 | Chevrolet | Yes | Bench |
RD, WR in Bench Mode
| TCU Brand | TCU Version | Vehicle Brand | FULL RD/WR | Mode |
| Bosch | 6L50 | GMC | Yes | Bench |
RD, WR in Bench Mode
| TCU Brand | TCU Version | Vehicle Brand | FULL RD/WR | Mode |
| Bosch | 6L80 | Cadillac | Yes | Bench |
RD, WR in Bench Mode
| TCU Brand | TCU Version | Vehicle Brand | FULL RD/WR | Mode |
| Bosch | 6L80 | Chevrolet | Yes | Bench |
RD, WR in Bench Mode
| TCU Brand | TCU Version | Vehicle Brand | FULL RD/WR | Mode |
| Bosch | 6L80 | GMC | Yes | Bench |
RD, WR in Bench Mode
| TCU Brand | TCU Version | Vehicle Brand | FULL RD/WR | Mode |
| Bosch | 6L90 | Cadillac | Yes | Bench |
RD, WR in Bench Mode
| TCU Brand | TCU Version | Vehicle Brand | FULL RD/WR | Mode |
| Bosch | 6L90 | Chevrolet | Yes | Bench |
RD, WR in Bench Mode
| TCU Brand | TCU Version | Vehicle Brand | FULL RD/WR | Mode |
| Bosch |
6L90 |
GMC | Yes | Bench |
Hydra-Matic 6T70/6T75/6T80
In 2002, a collaboration between Ford and GM gave birth to the automatic transmissions 6T70, 75 and 80. Designed for General Motors branded vehicles with front-engine transverse layout (both front-wheel and all-wheel drive), they were installed to manage various performance steps, ensuring power transmission to the wheels through six speeds and an innovative «five-clutch» system.
In fact, three epicyclic gear reducers with three fixed clutches and two rotating clutches are used; this saves a lot of space compared to free-wheel models. However, thanks to electronic controls, the clutch-to-clutch concept guarantees quick and precise shifts.
Regarding performance, the Hydra-Matic 6T70 handles up to 315 horsepower and 380Nm, the 6T75 also up to 315 horsepower and a maximum torque of over 400Nm, and finally, the 6T80 takes it up a notch with 400 horsepower and 500Nm. With ECM Titanium’s calibration on this particular TCUs, you can increase performance and reduce fuel consumption by adjusting clutch management and shift patterns.
Hydra-Matic 6L45/6L50/6L80/6L90
Developed and designed in-house by General Motors for vehicles with longitudinal front engines (both rear-wheel and all-wheel drive), these 6-speed automatic transmissions, thanks to their modular design, can handle various performance variants, always ensuring an optimal ratio.
All versions share an exclusive gear configuration that allows a wider range of gear ratios compared to a traditional planetary gear automatic transmission. This allows to customize the ratio and achieving fuel savings and excellent acceleration characteristics.
In this case as well, with ECM Titanium, you can intervene in the TCU calibration, ensuring complete parameter management. Increase the performance of vehicles equipped with these transmissions and reduce fuel consumption thanks to the precise and reliable intervention of ECM Titanium.
Come and discover all the latest developments in the world of reprogramming by Alientech at the Metropolitan Expo fairground in Athens on September 29th, 30th, and October 1st, 2023: Hall 1, booths E8 — E9 at CAMION TSOLAKIDIS SA.
We’re waiting for you in Greece, ready to welcome you with our products and services designed for calibration professionals.
Boost your business with us, book your entrance ticket now!
Invest in your tuning skills to improve your work and increase your earning opportunities.
Alientech training days are in-depth sessions aimed at your professionalization with all-round practical and theoretical knowledge of the automotive world. Everything you need to work in the tuning field providing a complete, reliable and valuable service to your customers.
One of our specialists will be at your side along the training path and will answer any questions you may have, so that you will no longer have any doubts and you can start working, right away, in complete autonomy!
Уже тридцать лет мы как команда разрабатываем, создаем и производим лучшие инструменты и программное обеспечение для чип-тюнеров и мехатроники.
За эти годы напряженной работы мы развились. Из динамичного стартапа мы превратились в многонациональную фирму с офисами и дилерами по всему миру.
P.IVA IT02007510023
Cap. Soc. € 10.329,14
Registro Produttori AEE IT10120000006984
Alientech © 2024 Alientech Srl, All Rights Reserved Privacy — Cookie — Terms of use — Legals — Edit cookies’ settings
Alientech Srl Cap. Soc. € 10.329,14 P.IVA IT02007510023 Registro Produttori AEE IT10120000006984
