BMW, Land Rover, PSA, Renault, and Opel. Many new European vehicles available in K-TAG.
K-Suite - Release 4.40
Alientech
June 23, 2021
Bosch MDG1 and MEV17, Delphi DCM and Denso DEC30: remap in Boot Mode and Service Mode these ECUS.
Our team of technicians and engineers of the development department participates in the European Championships! With six new protocols, dozens of vehicles among the most famous European brands are added to the K-TAG supported vehicles list. Work in Boot Mode and Service Mode with K-TAG on BMW, Land Rover, PSA, Renault, and Opel equipped with ECUS Bosch, Delphi and Denso.
Bosch MG1CS028
Bosch MD1CP032
BOSCH MEV17.4.2
DELPHI DCM1.2
DENSO DEC30
Some of these ECUS, like the Bosch MG1CS028, are equipped on the brand-new Range Rover, Defender, and Jaguar F-Pace. Or the Bosch MD1CP032 supplied on the new BMW X5. Others – DELPHI DCM1.2 – control the Renault Diesel engine K9K 790 equipped on Dacia in production from 2005 to 2010, or the Opel Corsa or Combo 1.7 Diesel with ECU Denso DEC30.
New K-TAG Protocol
Bosch MG1CS028
Read and write in Service Mode.
LAND ROVER
Defender
P360 3.0 V6 8AT
Petrol
265 Kw
Range Rover Sport
P400 3.0 V6 8AT
Petrol
250 Kw
Range Rover Velar
P340 3.0 V6 8AT
Petrol
294 Kw
JAGUAR
F-Pace
P340 3.0 V6 8AT
Petrol
250 Kw
New K-TAG Protocol
BOSCH MD1CP032
Read and write in Service Mode.
BMW
X5
xDrive25d
Diesel
170 Kw
New K-TAG Protocol
BOSCH MEV17.4.2
Read and write in Service Mode.
CITROEN
Berlingo
1.6 16v VTi
Petrol
70 Kw
New K-TAG Protocol
DELPHI DCM1.2
Read and write in Boot Mode.
DACIA
Duster
1.5 dCi 5MT
Diesel
63 Kw
Duster
1.5 dCi AWD 6MT
Diesel
50 Kw
Logan
1.5 dCi 5MT
Diesel
50 Kw
Logan Mcv
1.5 dCi 5MT
Diesel
50 Kw
Sandero
1.5 dCi 5MT
Diesel
63 Kw
Sandero Stepway
1.5 dCi 5MT
Diesel
63 Kw
NISSAN
Micra
1.5 dCi 86
Diesel
50 Kw
Note
1.5 dCi 70
Diesel
50 Kw
Note
1.5 dCi 86
Diesel
50 Kw
RENAULT
Clio
1.5 dCi 5MT
Diesel
59 Kw
Clio
1.5 dCi 5MT
Diesel
60 Kw
Clio Campus
1.5 dCi 5MT
Diesel
60 Kw
Duster
1.5 dCi 5MT
Diesel
48 Kw
Duster
1.5 dCi AWD 6MT
Diesel
48 Kw
Kangoo
1.5 dCi 5MT
Diesel
50 Kw
Kangoo
1.9 dCi 5MT
Diesel
50 Kw
Kangoo Campus
1.5 dCi 5MT
Diesel
63 Kw
Kubistar
1.5 dCi 5MT
Diesel
50 Kw
Logan
1.5 dCi 5MT
Diesel
59 Kw
Megane
1.5 dCi 5MT
Diesel
63 Kw
Megane
1.5 dCi 5MT
Diesel
63 Kw
Modus
1.5 dCi 5AT
Diesel
63 Kw
Modus
1.5 dCi 5MT
Diesel
63 Kw
Modus
1.5 dCi 5MT
Diesel
63 Kw
Pulse
1.5 dCi 5MT
Diesel
63 Kw
Sandero
1.5 dCi 5MT
Diesel
50 Kw
Sandero
1.5 dCi 5MT
Diesel
63 Kw
Sandero
1.5 dCi 5MT
Diesel
50 Kw
Sandero Stepway
1.5 dCi 5MT
Diesel
63 Kw
Scenic
1.5 dCi
Diesel
50 Kw
SUZUKI
Jimny
1.5 DDIS
Diesel
63 Kw
New K-TAG Protocol
DENSO DEC30
Read and write in Service Mode.
OPEL
Combo
1.7 CDTI
Diesel
74 Kw
Corsa
1.7 CDTI
Diesel
74 Kw
Meriva
1.7 CDTI
Diesel
74 Kw
Vita
1.7 CDTI
Diesel
74 kw
Read and Write Boot and Service Mode with K-TAG
K-TAG is the most complete and professional tool to read, write and clone an ECU or TCU of any vehicle.
New protocols provide full reading and writing in Boot Mode and Service Mode.
Bootmode allows to read and write, with open ECU, the deeper parts, simply by connecting the tool to the ECU electronic board.
Thanks to Service Mode, recalibration, repairing, and cloning become even simpler interventions. You do not have to open the ECU, the error margin at the minimum and your results to the maximum!
This new major development allows you to work on the Denso GEN IV R7F702002 V35A-FTS ECUs, installed in several off-road Toyota and Lexus models, as well as on 19 other control units, including both ECUs and TCUs.
Operate in all connection modes with 18 new protocols dedicated to the automotive world. This is one of the largest releases for KESS3: now expand your workshop’s intervention capabilities.