Read and write via OBD the Bosch DCU17PC43 ECUs equipped on several last gen Ford engines.
Work for tuning and repair purposes thanks to the newly supported protocol.
New K-TAG Protocol
Read and write in Service Mode.
E-Class | 350 Cdi | Diesel | 170 Kw |
New K-TAG Protocol
Read and write in Service Mode.
A-Class | 200 D 4Matic 7AT | Diesel | 100 Kw |
A-Class | 200 D 6MT | Diesel | 100 Kw |
A-Class | 200 D 7AT | Diesel | 100 Kw |
A-Class | 220 CDI 7AT | Diesel | 100 Kw |
A-Class | 220 D 4Matic 7AT | Diesel | 100 Kw |
A-Class | 220 D 4Matic 7AT | Diesel | 100 Kw |
A-Class | 220 D 7AT | Diesel | 100 Kw |
CLA-Class | 200 CDI 4Matic 7AT | Diesel | 100 Kw |
CLA-Class | 200 CDI 4Matic 7AT | Diesel | 100 Kw |
CLA-Class | 200 CDI 6MT | Diesel | 100 Kw |
CLA-Class | 200 CDI 7AT | Diesel | 100 Kw |
CLA-Class | 200 CDI 7AT | Diesel | 100 Kw |
CLA-Class | 220 CDI 4Matic 7AT | Diesel | 125 Kw |
CLA-Class | 220 CDI 7AT | Diesel | 125 Kw |
CLA-Class | 220 CDI 7AT | Diesel | 125 Kw |
CLA-Class Shooting Brake | 200 CDI 4Matic 7AT | Diesel | 125 Kw |
CLA-Class Shooting Brake | 200 CDI 6MT | Diesel | 125 Kw |
CLA-Class Shooting Brake | 200 CDI 7AT | Diesel | 125 Kw |
CLA-Class Shooting Brake | 200 CDI 7AT | Diesel | 100 Kw |
CLA-Class Shooting Brake | 220 4Matic | Diesel | 100 Kw |
CLA-Class Shooting Brake | 220 CDI 7AT | Diesel | 100 Kw |
CLA-Class Shooting Brake | 220 CDI 7AT | Diesel | 100 Kw |
GLA-Class | 200 CDI 4Matic 7AT | Diesel | 100 Kw |
GLA-Class | 200 CDI 6MT | Diesel | 100 Kw |
GLA-Class | 200 CDI 7AT | Diesel | 100 Kw |
GLA-Class | 200 d 4Matic 7AT | Diesel | 100 Kw |
GLA-Class | 200 d 6MT | Diesel | 100 Kw |
GLA-Class | 200 d 7AT | Diesel | 125 Kw |
GLA-Class | 220 CDI 4Matic 7AT | Diesel | 125 Kw |
GLA-Class | 220 CDI 7AT | Diesel | 125 Kw |
GLA-Class | 220 d 4Matic 7AT | Diesel | 125 Kw |
GLA-Class | 220 d 7AT | Diesel | 125 Kw |
SLC-Class | 250 d 9AT | Diesel | 125 Kw |
New K-TAG Protocol
Read and write in Service Mode.
C-Class | 220 BlueTEC 6MT | Diesel | 125 Kw |
C-Class | 220 BlueTEC 7AT | Diesel | 125 Kw |
C-Class | 250 d 4Matic 9AT | Diesel | 150 Kw |
C-Class Cabriolet | 250 d 4Matic 9AT | Diesel | 150 Kw |
C-Class Coupe | 250 d 4Matic 9AT | Diesel | 150 Kw |
New K-TAG Protocol
Read and write in Service Mode.
Sprinter | 316 CDI | Diesel | 120 Kw |
New K-TAG Protocol
Read and write in Service Mode.
CLS-Class | 250 BlueTEC 9AT | Diesel | 150 Kw |
CLS-Class | 250 BlueTEC 4MATIC 7AT | Diesel | 150 Kw |
New K-TAG Protocol
Read and write in Service Mode.
Q30 | 2.2d 7DCT 2WD | Diesel | 125 Kw |
Q30 | 2.2d 7DCT AWD | Diesel | 125 Kw |
Q50 | 2.2d 6MT | Diesel | 125 Kw |
Q50 | 2.2d 7AT | Diesel | 125 Kw |
Q70 | 2.2d 7AT | Diesel | 125 Kw |
New K-TAG Protocol
Read and write in Service Mode.
C-Class | 200 BlueTEC 6MT | Diesel | 100 Kw |
C-Class | 220 BlueTEC 6MT | Diesel | 125 Kw |
C-Class | 220 BlueTEC 7AT | Diesel | 125 Kw |
C-Class | 220 BlueTEC BlueEFFICIENCY 7AT | Diesel | 120 Kw |
Thanks to Service Mode, so without opening the ECU, you can read, write, and clone the ECU Bosch EDC17CP10 and Delphi CRD3E.1, CRD3.40, CRD3.50 Mercedes-Benz.
It means that you can intervene quickly and easily to recalibrate or repair ECUS that you have certainly worked on before. Alientech offers concrete solutions to work more efficiently every day, building loyalties to your customers to get the maximum.
These ECUS control OM651 Diesel motors, produced from 2008 to 2020, initially produced to satisfy and anticipate the Euro 5 anti-pollution standards and to be ready for the Euro 6 standards.
We are talking about turbodiesel four-cylinder motors with third generation common rail technology. These motors have avant-garde solutions, like piezo-electric injectors, used until then only on a few other thrusters in the world. This technology allows an accurate and particularly fast Diesel dosage. This allows less waste, as well as lower carbon footprint.
Beside the 2.2L, the OM651 motor has been produced between the years 2011 and 2014, an 1.8L motor in two versions of power, respectively 80kW in the limited version, and 100k on the one at full power. From 2014 the motor was no longer produced, to leave space totally to the 2.2L version.
One of the vehicles we support is the new 2020 Sprinter 316 CDI, equipped with ECU Delphi CRD3P.C0. A widely used commercial vehicle, offering high comfort and new technologies, but that can be greatly improved in the performances: it must consume as little as possible, but have a brilliant driving, great propulsive force and be satisfactory on the road.
Thanks to these new protocols and to ECM Remapping software you can recalibrate at best and obtain the right performance, according to load capacity, to the path that it must follow and to the fuel quality.
Work for tuning and repair purposes thanks to the newly supported protocol.
Intervene for tuning and repair on the supported new motorcycles and ATVs.
Even more possibilities for modification and customization are available for KTM, Husqvarna and GasGas motorbikes.
Offer a comprehensive service to your customers thanks to new protocols for KESS3.
Expand your workshop’s capabilities in the heavy-duty vehicle field with KESS3.
Even more possibilities for modification and customisation are available for KTM, Husqvarna, GasGas, Triumph and Suzuki motorbikes.