K-TAG Service Mode for Mercedes-Benz produced from 2008 to today!

K-Suite - Release 4.38

Alientech

juin 9, 2021

Full reading and writing without opening the ECU with K-TAG for Bosch EDC17CP10 and Delphi CRD3.E/F/P Mercedes-Benz.

4 new protocols to work in Service Mode on dozens of Mercedes-Benz and Infiniti vehicles, in production from 2008 to today, equipped with ECUS Bosch EDC17CP10 and Delphi CRD3.E/F/P Mercedes-Benz.

New K-TAG Protocol

Bosch EDC17CP10

Lisez et écrivez en Service Mode.

MERCEDES-BENZ

E-Class

350 Cdi

Diesel

170 Kw

New K-TAG Protocol

Delphi CRD3.E1

Lisez et écrivez en Service Mode.

MERCEDES-BENZ

A-Class	200 D 4Matic 7AT	Diesel	100 Kw
A-Class	200 D 6MT	Diesel	100 Kw
A-Class	200 D 7AT	Diesel	100 Kw
A-Class	220 CDI 7AT	Diesel	100 Kw
A-Class	220 D 4Matic 7AT	Diesel	100 Kw
A-Class	220 D 4Matic 7AT	Diesel	100 Kw
A-Class	220 D 7AT	Diesel	100 Kw
CLA-Class	200 CDI 4Matic 7AT	Diesel	100 Kw
CLA-Class	200 CDI 4Matic 7AT	Diesel	100 Kw
CLA-Class	200 CDI 6MT	Diesel	100 Kw
CLA-Class	200 CDI 7AT	Diesel	100 Kw
CLA-Class	200 CDI 7AT	Diesel	100 Kw
CLA-Class	220 CDI 4Matic 7AT	Diesel	125 Kw
CLA-Class	220 CDI 7AT	Diesel	125 Kw
CLA-Class	220 CDI 7AT	Diesel	125 Kw
CLA-Class Shooting Brake	200 CDI 4Matic 7AT	Diesel	125 Kw
CLA-Class Shooting Brake	200 CDI 6MT	Diesel	125 Kw
CLA-Class Shooting Brake	200 CDI 7AT	Diesel	125 Kw
CLA-Class Shooting Brake	200 CDI 7AT	Diesel	100 Kw
CLA-Class Shooting Brake	220 4Matic	Diesel	100 Kw
CLA-Class Shooting Brake	220 CDI 7AT	Diesel	100 Kw
CLA-Class Shooting Brake	220 CDI 7AT	Diesel	100 Kw
GLA-Class	200 CDI 4Matic 7AT	Diesel	100 Kw
GLA-Class	200 CDI 6MT	Diesel	100 Kw
GLA-Class	200 CDI 7AT	Diesel	100 Kw
GLA-Class	200 d 4Matic 7AT	Diesel	100 Kw
GLA-Class	200 d 6MT	Diesel	100 Kw
GLA-Class	200 d 7AT	Diesel	125 Kw
GLA-Class	220 CDI 4Matic 7AT	Diesel	125 Kw
GLA-Class	220 CDI 7AT	Diesel	125 Kw
GLA-Class	220 d 4Matic 7AT	Diesel	125 Kw
GLA-Class	220 d 7AT	Diesel	125 Kw
SLC-Class	250 d 9AT	Diesel	125 Kw

New K-TAG Protocol

Delphi CRD3P.D1

Lisez et écrivez en Service Mode.

MERCEDES-BENZ

C-Class	220 BlueTEC 6MT	Diesel	125 Kw
C-Class	220 BlueTEC 7AT	Diesel	125 Kw
C-Class	250 d 4Matic 9AT	Diesel	150 Kw
C-Class Cabriolet	250 d 4Matic 9AT	Diesel	150 Kw
C-Class Coupe	250 d 4Matic 9AT	Diesel	150 Kw

New K-TAG Protocol

Delphi CRD3P.C0

Read and write in Service Mode.

MERCEDES-BENZ

Sprinter

316 CDI

Diesel

120 Kw

New K-TAG Protocol

Delphi CRD3.7

RLisez et écrivez en Service Mode.

MERCEDES-BENZ

CLS-Class	250 BlueTEC 9AT	Diesel	150 Kw
CLS-Class	250 BlueTEC 4MATIC 7AT	Diesel	150 Kw

New K-TAG Protocol

Delphi CRD3.N5

Lisez et écrivez en Service Mode.

INFINITI

Q30	2.2d 7DCT 2WD	Diesel	125 Kw
Q30	2.2d 7DCT AWD	Diesel	125 Kw
Q50	2.2d 6MT	Diesel	125 Kw
Q50	2.2d 7AT	Diesel	125 Kw
Q70	2.2d 7AT	Diesel	125 Kw

New K-TAG Protocol

Delphi CRD3.50

Read and write in Service Mode.

MERCEDES-BENZ

C-Class	200 BlueTEC 6MT	Diesel	100 Kw
C-Class	220 BlueTEC 6MT	Diesel	125 Kw
C-Class	220 BlueTEC 7AT	Diesel	125 Kw
C-Class	220 BlueTEC BlueEFFICIENCY 7AT	Diesel	120 Kw

Work in Service Mode with Alientech K-TAG

Thanks to Service Mode, so without opening the ECU, you can read, write, and clone the ECU Bosch EDC17CP10 and Delphi CRD3E.1, CRD3.40, CRD3.50 Mercedes-Benz.

It means that you can intervene quickly and easily to recalibrate or repair ECUS that you have certainly worked on before. Alientech offers concrete solutions to work more efficiently every day, building loyalties to your customers to get the maximum.

OM651 Diesel motors

These ECUS control OM651 Diesel motors, produced from 2008 to 2020, initially produced to satisfy and anticipate the Euro 5 anti-pollution standards and to be ready for the Euro 6 standards.

We are talking about turbodiesel four-cylinder motors with third generation common rail technology. These motors have avant-garde solutions, like piezo-electric injectors, used until then only on a few other thrusters in the world. This technology allows an accurate and particularly fast Diesel dosage. This allows less waste, as well as lower carbon footprint.

Beside the 2.2L, the OM651 motor has been produced between the years 2011 and 2014, an 1.8L motor in two versions of power, respectively 80kW in the limited version, and 100k on the one at full power. From 2014 the motor was no longer produced, to leave space totally to the 2.2L version.

Remap the new 2020 Sprinter 316!

One of the vehicles we support is the new 2020 Sprinter 316 CDI, equipped with ECU Delphi CRD3P.C0. A widely used commercial vehicle, offering high comfort and new technologies, but that can be greatly improved in the performances: it must consume as little as possible, but have a brilliant driving, great propulsive force and be satisfactory on the road.

Thanks to these new protocols and to ECM Remapping software you can recalibrate at best and obtain the right performance, according to load capacity, to the path that it must follow and to the fuel quality.

More News

Nouvelle mise à jour de Drivers ECM Titanium pour calculateurs Delphi CRD3.40.

Encore plus de possibilités de modification et de personnalisation pour intervenir de manière toujours plus efficace sur les véhicules de la marque Mercedes-Benz.

Alientech août 9, 2024

ECM Titanium Case History

Bosch EDC17CP45 BMW 535d F10

Alientech août 2, 2024

Burbles/Pop&Bang – ECM Titanium tuning tips

Burbles/Pop&Bang ECM Titanium tuning tips

Alientech juillet 26, 2024

Nouveau pack pour le KESS3 et le Powergate : profitez de l’avantage technologique à votre disposition avec les nouveaux protocoles pour les motos et les moteurs marins.

De nouvelles opportunités pour votre atelier : élargissez votre gamme de services avec les nouvelles unités de contrôle prises en charge dans le monde des deux-roues, y compris les quads et les ATV, ainsi que les hors-bord Yamaha.

Alientech juillet 23, 2024

Nouvelle mise à jour de Drivers ECM Titanium pour calculateurs Delphi CRD3.E1.

Encore plus de possibilités de modification et de personnalisation pour intervenir de manière toujours plus efficace sur les véhicules de la marque Mercedes-Benz.

Alientech juillet 19, 2024

Nouvelle fonction DTC : Diagnostic et réinitialisation des DTC avec le KESS3

Une nouvelle fonctionnalité est désormais disponible sur l’outil de reprogrammation de la marque Alientech.

Alientech juin 27, 2024

ALIENTECH

Depuis trente ans, en équipe, nous développons, créons et produisons les meilleurs outils et logiciels pour les chiptuners et la mécatronique.
Nous avons évolué au cours de ces années de travail acharné. D’une start-up dynamique, nous sommes devenus une entreprise multinationale implantée dans le monde entier.

Qui sommes Nous